The interface allows to connect a rear-view camera to the factory-infotainment system. A coding of the Head-Unit on rear view camera is additionally necessary.
| Brand | Model | Navigation |
|---|---|---|
| Seat |
Alhambra2 (7N) model year from 2016 Vehicles with factory OPS |
MIB STD2 PQ/+NAV Media System Plus 1x SD vertical left or 2x SD vertical left + right of 6.33inch monitor |
|
Arona model year from 2018, Ateca (KH7) model year from 2017, Ibiza (6P) model year from 2016, Leon3 (5F) model year from 2013, Toledo4 (KG) model year from 2016 Vehicles with factory OPS |
MIB/MIB2/MIB3 High/Standard Navigationssystem Plus or Media System Plus 6.5inch or 8inch monitor |
|
| Skoda |
Yeti (5L) model year from 2015 til 2017 Vehicles with factory OPS |
MIB STD2 PQ +/NAV Bolero/Amundsen 1x SD vertical left or 2x SD vertical left + right of 6.33inch monitor |
|
Fabia3 (NJ) model year from 2014, Karoq (NU7) model year from 2018, Kodiaq (NS7) model year from 2017, Octavia3 (5E) model year from 2012, Rapid (NH1) model year from 2016, Superb3 (3V) model year from 2015 Vehicles with factory OPS |
MIB/MIB2/MIB3 High/Columbus and Standard/Bolero/Amundsen 5.8inch, 6.5inch, 8inch or 9.2inch monitor |
|
| Volkswagen |
Amarok (2H) model year from 2017, Beetle (5C) model year from 2015, Caddy 4 (SA) model year 2016 til 2020, Scirocco3 (13) model year from 2016, Sharan (7N) model year from 2016, Transporter T6 (SG) from 07/2015 til 10/2019 Vehicles with factory OPS |
MIB STD2 PQ/+NAV Composition Media/Discover Media 1x SD vertical left or 2x SD vertical left + right and disc drive above 6.33inch monitor |
|
Arteon (3H) model year from 2018, Crafter (SZ/SY) model year from 2017, Golf7 model year from 2012, Golf7 Sportsvan model year from 2014, Passat (B8) model year from 2016, Polo5 (6C) model year from 2014 til 2017, Polo6 (AW1) model year from 2018, T-Cross (C1) from 04/2019, T-Roc (A11) model year from 2018, Taigo (CS), from 09/2021, Tiguan2 (AD1) model year from 2016, Touran (5T) model year from 2016, Transporter T6.1 (6H) from 10/2019 Vehicles with factory OPS |
MIB/MIB2/MIB3 High/Discovery Pro and Standard/Composition Media 5.8inch, 6.5inch, 8inch or 9.2inch monitor |
|
|
* NOT compatible to Composition Media with part numbers, as a full coding of the head-unit is not possible on these: 3Q0035812 3Q0035819, 3Q0035819A, 3Q0035819B, 3Q0035819C 3Q0035820, 3Q0035820A, 3Q0035820B, 3Q0035820C 5G0035812 5G0035819, 5G0035819A, 5G0035819B, 5G0035819C 5G0035820, 5G0035820A, 5G0035820B, 5G0035820C The letter at the end is merely the software version of the head-unit, newer versions are likely to not be compatible as well! Only the last 6 digits/numbers are relevant. The part number of the head-unit can be displayed on the monitor: Menu button->Setup->System-Information->part number device |
||
| Coding | Vehicle must be coded by diagnosis computer to rear-view camera. The vehicle can only be coded if it is equipped with a factory optical parking distance system with graphical display on the monitor. |
| After-market rear-view camera | Compatible only with NTSC cameras. |
| Power supply output | Maximum permitted current per output 180mA! Total permitted current of both outputs together maximum 200mA. For higher current requirements (ignition, R-gear) use a relay with a coil resistance of min. 75Ω or for two relays min. 150Ω. |
| Operating voltage | 12V DC (11~16V) |
| Standby current | 2mA |
| Video input formats | NTSC |
| Dimensions CAN-box | 27 x 49 x 18mm (W x H x D) |
The driver must not be distracted by moving pictures while driving. In most countries/states this is prohibited by law. While the vehicle is moving, this product should only be used to display rear-view-camera pictures or fixed menus like a MP3 menu from a DVD-player.